Replacement or upgraded S4 Performance Monitor for tracking key workout data, including time, distance, stroke rate, speed, intensity and calories.
Available with or without Bluetooth connectivity.
Compatible with WaterRower Original, Lite, Metallic and S1 models.
Includes: S4 monitor board, LCD and buttons, front housing, front housing graphic, monitor wiring assembly and sensor disc.
Please note: Older WaterRower models Series III and earlier require additional modifications. WaterRower Hybrid and Performance models also require modification for compatibility. Please contact us for more information.
Replacement sensor disk that triggers the monitor’s sensor to measure the rotational speed of the paddle within the WaterFlywheel, enabling performance data to be calculated and displayed.
Compatible with: WaterRower wooden, Metallic M1 and S1 models fitted with an S4 Performance Monitor or S4 Bluetooth Monitor.
Replacement guide wheels that sit underneath the seat, keeping it securely aligned with the rails as it moves.
Compatible with: WaterRower wooden and S1 models. Two versions are available:
WRP-S405: 3 cm diameter guide wheels for current models.
WRP-S400: 3.5 cm diameter guide wheels typically used on models over 25 years old.
Includes: Four guide wheels, four spacers and four washers.
Please note: Measure the diameter of your existing guide wheels before selecting a variant. If you are unsure which version is compatible with your WaterRower, please contact our team.
Replacement load wheel assembly for securing the seat load wheel to the seat axle and allowing the seat to travel smoothly along the rails.
Compatible with: WaterRower Original, Metallic, S1 and Lite models.
Includes: One load wheel with bearings, two washers, one wave washer and one circlip.
Please note: Four load wheel assemblies are required per WaterRower. These wheels sit on the sides of the seat and should not be confused with the guide wheels, which sit at a 90-degree angle and keep the seat aligned on the rail extrusions.
Replacement standard-width WaterRower handle, available with either a bolt-on or Velcro attachment.
Select the version that matches your WaterRower’s clutch:
- Bolt-on attachment for newer models fitted with a plastic clutch.
- Velcro attachment for older models fitted with a metal clutch.
Please note: Check the clutch type on your WaterRower before selecting a variant. If you are unsure which attachment you require, please contact our team.
Repair kit for resealing a WaterRower tank when the adhesive bond around the seam has failed and caused a leak.
Compatible with: All WaterRower models.
Please note: This kit is designed to repair a failed adhesive seal only. Cracked upper or lower tank halves cannot be repaired and must be replaced. Handle the tank carefully during repair.
Includes: Adhesive, plunger, adhesive mixer and ½-inch needle applicator. Applicator gun not included.
Complete repair kit for resealing a WaterRower tank when the adhesive bond around the seam has failed and caused a leak.
Compatible with: All WaterRower models.
Please note: This kit is designed to repair a failed adhesive seal only. Cracked upper or lower tank halves cannot be repaired and must be replaced. Handle the tank carefully during repair.
