Complete repair kit for resealing a WaterRower tank when the adhesive bond around the seam has failed and caused a leak.
Compatible with: All WaterRower models.
Please note: This kit is designed to repair a failed adhesive seal only. Cracked upper or lower tank halves cannot be repaired and must be replaced. Handle the tank carefully during repair.
Replacement guide wheels that sit underneath the seat, keeping it securely aligned with the rails as it moves.
Compatible with: WaterRower wooden and S1 models. Two versions are available:
WRP-S405: 3 cm diameter guide wheels for current models.
WRP-S400: 3.5 cm diameter guide wheels typically used on models over 25 years old.
Includes: Four guide wheels, four spacers and four washers.
Please note: Measure the diameter of your existing guide wheels before selecting a variant. If you are unsure which version is compatible with your WaterRower, please contact our team.
Replacement load wheel assembly for securing the seat load wheel to the seat axle and allowing the seat to travel smoothly along the rails.
Compatible with: WaterRower Original, Metallic, S1 and Lite models.
Includes: One load wheel with bearings, two washers, one wave washer and one circlip.
Please note: Four load wheel assemblies are required per WaterRower. These wheels sit on the sides of the seat and should not be confused with the guide wheels, which sit at a 90-degree angle and keep the seat aligned on the rail extrusions.
Repair kit for resealing a WaterRower tank when the adhesive bond around the seam has failed and caused a leak.
Compatible with: All WaterRower models.
Please note: This kit is designed to repair a failed adhesive seal only. Cracked upper or lower tank halves cannot be repaired and must be replaced. Handle the tank carefully during repair.
Includes: Adhesive, plunger, adhesive mixer and ½-inch needle applicator. Applicator gun not included.
Replacement rail extrusions measuring 1185 mm / 46.65 in, providing a smooth running surface for the seat. The integrated lips retain the guide wheels and keep the seat correctly aligned along the wooden rails.
Compatible with: WaterRower models with wooden rails. Please note that extrusion lengths vary between different generations.
Please note: Measure your existing extrusions before ordering to ensure you select the correct length. If you are unsure about compatibility, please contact our team.
Includes: One pair of rail extrusions. Fixings are supplied separately.
The replacement push button foot strap assembly secures your feet to the footboard on WaterRower Original rowing machines. Not compatible with the dual pin mechanism used on commercial footboards.
Includes: Foot strap, foot strap clamp bar, rear foot strap guide bracket, two bolts and two nuts.
Replacement rail extrusions measuring 1200 mm / 47.25 in, providing a smooth running surface for the seat. The integrated lips retain the guide wheels and keep the seat correctly aligned along the wooden rails.
Compatible with: WaterRower Metallic and S1 models. Please note that extrusion lengths vary between different generations.
Please note: Measure your existing extrusions before ordering to ensure you select the correct length. If you are unsure about compatibility, please contact our team.
Includes: One pair of rail extrusions. Fixings are supplied separately.
Keep your phone or tablet comfortably in view while rowing. Designed for WaterRower Original and Hybrid Series models, the wooden arm folds flat and can remain attached when the machine is stored upright. Includes a Phone Holder, with Medium and Large Tablet Holder options available.
A 19.5” high-definition touchscreen designed to enhance your at-home workouts with seamless access to CityRow's interactive fitness content. The screen optimized for visibility during rowing, floor workouts, or yoga, with adjustable positioning to suit your space and routine.
Keep your phone or tablet comfortably in view while rowing. Designed specifically for the WaterRower Lite, the wooden arm folds flat and can remain attached when the machine is stored upright. Includes a Phone Holder, with Medium and Large Tablet Holder options available.
Keep your phone or tablet comfortably in view while rowing. Designed for WaterRower Metallic models, HiRise and LoRise, the metal arm folds flat and can remain attached when the machine is stored upright. Includes a Phone Holder, with Medium and Large Tablet Holder options available.
Monitor your heart rate on the WaterRower S4 Bluetooth and S4 Performance Monitor using reliable ANT+ wireless technology. Includes a chest belt transmitter and internal receiver.
Replace your WaterRower’s standard pulley with SmartRow to measure power, force and stroke length accurately through the WaterRower Connect app. Designed for compatible machines not already fitted with the PowerPulley.
Securely position your tablet in view while rowing. Designed for the WaterRower Phone & Tablet Arm and available in Medium and Large sizes. Phone & Tablet Arm sold separately.
Protect and refresh your wooden fitness equipment with Danish Oil. It penetrates the wood to nourish the surface, enhance its natural grain and provide a durable, water-resistant finish.
Ideal for maintaining compatible WaterRower and NOHRD products. Apply sparingly with a clean, lint-free cloth, following the wood grain, and allow to dry fully before use.
