Complete repair kit for resealing a WaterRower tank when the adhesive bond around the seam has failed and caused a leak.
Compatible with: All WaterRower models.
Please note: This kit is designed to repair a failed adhesive seal only. Cracked upper or lower tank halves cannot be repaired and must be replaced. Handle the tank carefully during repair.
Replacement load wheel assembly for securing the seat load wheel to the seat axle and allowing the seat to travel smoothly along the rails.
Compatible with: WaterRower Original, Metallic, S1 and Lite models.
Includes: One load wheel with bearings, two washers, one wave washer and one circlip.
Please note: Four load wheel assemblies are required per WaterRower. These wheels sit on the sides of the seat and should not be confused with the guide wheels, which sit at a 90-degree angle and keep the seat aligned on the rail extrusions.
Repair kit for resealing a WaterRower tank when the adhesive bond around the seam has failed and caused a leak.
Compatible with: All WaterRower models.
Please note: This kit is designed to repair a failed adhesive seal only. Cracked upper or lower tank halves cannot be repaired and must be replaced. Handle the tank carefully during repair.
Includes: Adhesive, plunger, adhesive mixer and ½-inch needle applicator. Applicator gun not included.
